A live print job looks simple on the day: a guest picks a design and walks off wearing it a couple of minutes later. For Columbus, most of the work happens before that, because the whole kit starts 1,962 miles away in Fullerton.
Weeks before
You send a logo or artwork and we proof it. Art locks about a week out so we can burn screens and print DTF transfers before anything ships. The garment order locks around the same time, sized to your headcount. Then the presses, dryers, tables and blanks go out by freight to your venue's dock.
The day before and the day of
- The crew flies in: a day early, so we're not racing the freight or the weather.
- Build: each station needs roughly 10×10 ft and two 120V circuits. We set up and run test prints before doors.
- Guests choose: a garment, a size, a design or a patch. Picking it is half of why people care.
- Print and hand off: one press does up to 60 an hour, and our two-press station clears 100+ when the line is steady.
What the venue provides
Floor space, two dedicated circuits per station, a level surface and a line path that doesn't block exits. At the Greater Columbus Convention Center that means ordering power through the venue. In a German Village event room it may just mean finding the right outlets. More on venue requirements.
Which station to run
Volume points to screen printing, full color or names point to DTF, and a hat bar or embroidery reads as a nicer gift. The short version is in how live printing works, or send us your Columbus event.
Columbus notes
Planning a Columbus build from Fullerton
Because nothing is local, we plan the room before the crates leave: where the dock is, where the power drops are, where the line forms and where guests pick their garment.
The station is the same one we run everywhere: presses, flash dryers, heat presses, blanks, tables, signage and trained printers. It ships freight, and the crew lands the day before the event.